|
|
|
|
|
|
|
4
|
|
Sector
|
Health Services/Equipments Tenders
|
Tender Value
|
N.A.
|
|
Location
|
Kerala Tenders
|
Ref.No
|
37290136
|
|
Closing Date
|
02 - Dec - 2019
|
16 Days to go
|
View Tender Details
|
|
Supply of installation of digital radiography system, speech therapy kil, separating funnel shaker, endotrached cuff pressure monitor, flexible intubating endoscope, heartsim simulator, speed vac, syringe infusion pump (dual). transgenic zebra fish facility, bicarbonate mixer, dialyzer reprocessing system, flexi rigid thoracoscope, dialysis consumables, operating microscope with observance camera and video, hand held autore fractokeratometer, keratometer, portable one densitometer, refrigerator – various types, pharmacy refrigerator (1000 litre). transport ventilator, blood warmer, savary gilard esophageal dilators with guide, advanced airway trainer for difficult intubation, virtual reality anatomy dissection table, arthroscopic surgical simulator, trauma accessories, trauma training simulator. #*. Supply of blender, cheatle's forceps and jar, filter funneland adapters, manifold for membrane filteration (3 manifold) with end cap and hosebarb cap, micro filtration unit, micro, wave oven for melting microbiology media, mixerl grinder, multi mantle (300x6w).temperature humidity monitoring device, temperature indicator with probe (250- 1000*c). vaucum presssure pump (for membrane filtration).
|
|
|
|
|
|
|
|
7
|
|
Sector
|
Non Classified Tenders
|
Tender Value
|
8.01 Million approx. / 80.17 Lakh
|
|
Location
|
Kerala Tenders
|
Ref.No
|
37267306
|
|
Closing Date
|
25 - Nov - 2019
|
9 Days to go
|
View Tender Details
|
|
Setting up of medical college at painavu idukki fire fighting works for the residential facilities -"""fire hydrant (down comer) system, supply, installation, testing and commissioning of electric driven pump set (terrace pump) suitable for automatic operation and consisting of following, complete in all respect as required and as per the technical specification. monoblock pump rated for 900lpm, 40 m head c.i body, bronze impeller,ss shaft with mechanical seal, volute type with suitable hp sq cage induction motor, suitable for operation on 415v, 3phase 50hz, ac with ip 55 class of protection for enclosure, horizontal foot mounted type with class f insulation.m.s. fabricated common base plate, foundation bolts, anti vibration pads etc. as required. the cost shall include suitable capacity starter control panel with push buttons and one isolator near the pump complete with all necessary cabling to provide successful automatic operation of the pump. (the starting of terrace pump should' be automatic with pressure switch incorporated in down-comer side so that with opening of any hydrant valve or hose reel on any fioor, it will start automatically with fall in line pressure. in addition, there should be a manual push button starter in the starter control panel to be located on ground floor of building. stopping of pump should be by a push button located in the same starter control.)", supply, installation, testing and commissioning of electric driven pump set (terrace pump) suitable for automatic operation and consisting of following, complete in all respect as required and as per the technical specification. monoblock pump rated for 450lpm, 40 m head c.i body, bronze impeller,ss shaft with mechanical seal, volute type with suitable hp sq cage induction motor, suitable for operation on 415v, 3phase 50hz, ac with ip 55 class of protection for enclosure, horizontal foot mounted type with class f insulation.m.s. fabricated common base plate, foundation bolts, anti vibration pads etc. as required. the cost shall include suitable capacity starter control panel with push buttons and one isolator near the pump complete with all necessary cabling to provide successful automatic operation of the pump. (the starting of terrace pump should' be automatic with pressure switch incorporated in down-comer side so that with opening of any hydrant valve or hose reel on any fioor, it will start automatically with fall in line pressure. in addition, there should be a manual push button starter in the starter control panel to be located on ground floor of building. stopping of pump should be by a push button located in the same starter control.), supply, installation, testing and commissioning of pressure gauge 0-200 psi ( 0 - 14 kg ) range, 3/8" bsp bottom entry,6" dial weather proof with stainless steel internals including fittings etc. complete as required as per technical specification., supply, installation, testing and commissioning of industrial type pressure switch having 1/4" bsp(f) connection ip:32 enclosure protection, phosphor bronze bellows as sensing element, spdt contact system, switch rating 6a inductive/loa resistive 380 v ac, 0.2a inductive/10a resistive 250v dc suit with ball valve etc. complete as required with necessary control cablings & wirings for successful system operation as per technical specification., supply, laying, testing & commissioning of 'c' class heavy duty ms pipe conforming to is 1239 including welding, fittings like elbows, tees flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with one coat of primer and two or more coats of synthetic enamel paint of required shade complete as required as per the technical specification., 100 mm dia, 80 mm dia, supply, laying, testing & commissioning of 'c' class heavy duty ms pipe conforming to is 1239, including drop forged fittings like elbows, tees flanges,reducers, tapers, nuts bolts, gaskets etc. conforming to is standards, in ground at minimum depth of 1 m, including welding, excavation & providing cement concrete blocks as supports, anticorrosive wrapping coating minimum 4 mm thickness as per is10221, refilling the trench etc. of following sizes complete as required as per the technical specification., 100 mm dia, 80 mm dia, supply, installation, testing and commissioning of dual plate non-return valve of following sizes having pn 16 pressure rating complete with ci body, ductile iron disc, ss plates vulcanized nbr seal flanged end, gi bolts, nuts, washers etc. as required as per technical specification and confirming to api 594., 100 mm dia, supply, installation, testing and commissioning of isi marked butterfly valve of following sizes having pn 16 rating conforming to is 13095 complete with ci body, epdm liner,ss disc nitrile sheet,o -ring, flanges, bolts, nuts, washers etc. as required as per technical specification., 100 mm dia, "supply,installation,testing and commis
|
|
|
|
8
|
|
Sector
|
Municipal Corporations Tenders
|
Tender Value
|
N.A.
|
|
Location
|
Kerala Tenders
|
Ref.No
|
37348925
|
|
Closing Date
|
25 - Nov - 2019
|
9 Days to go
|
View Tender Details
|
|
Supply of various items and nregs material supply stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate 40 mm nominal size and above, stone aggregate below 40 mm nominal size, coarse sand (zone iii), coarse sand, portland cement, cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), sundries, stone aggregate(single size): 10 mm nominal size, laterite stones 44cm x 24cm x 14cm, soling stone & masonry stone, solid blocks of size 30x20x15cm, twisted steel/deformed bars, steel, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), adjustable span eso+si (2.35-3.40), wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), second class kail wood in planks, second class kail wood in scantling, safeda ballies 125 mm diameter, timber, solid blocks of size 40x20x20cm, solid blocks of size 40x20x10cm, fine sand (zone iv), fine sand (1 part badarpur sand : 2 parts jamuna sand, precast chequered cement tiles 22 mm thick dark shade using ordinary, cement, black colour dark shade pigment, deharadun white lime, water proofing cement paint, vitrified floor tile 60x60 cm, high polymer modified quickset tile adhesive, ceramic glazed tiles ist quality 300 x 300 mm in all shades designs, except white, ivory, fume red brown etc., ceramic glazed tiles ist quality minimum thickness 5 mm in all colours, shades and designs except burgundy, bottle green black, rolling shutter made of 80x1.25 mm machine rolled laths, top cover for rolling shutters 1.25 mm thick, 27.5 cm long wire spring grade no 2 for rolling shutters, g.i. pipes 40 mm dia, g.i. pipes below 100 mm dia, welding by electric plant, anjili wood scantls, 35 mm thick factory made solid panel pvc door shutter of single piece, extruded profile non decorative finished (matt finished), powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, pincoda wood scantls, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, pincoda wood planks, float glass sheet of nominal thickness 4 mm (weight not less than 10, kg/sqm), mild steel round bar above 12 mm dia, flats up to 10 mm in thickness, rawl plug 50 mm (designation 10 nos), black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type wate closet, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe), polyethylene water storage tank with cover and suitable locking, arrangemnet, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, stainless steel kitchen sink - without drain board 470x420 mm bowl, depth 178 mm, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with, length not less than 700 mm i/c pvc waste fittings, pvc pipe 110 mm outer dia 6kgf/cm2, hollow bloks oof size 40x20x10cm,
|
|
|
|
|
|
|