Product Detail :
|
Supply of various items and nregs material supply stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)20 mm nominal size, stone aggregate 40 mm nominal size and above, stone aggregate below 40 mm nominal size, coarse sand (zone iii), coarse sand, portland cement, cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), sundries, stone aggregate(single size) 10 mm nominal size, laterite stones 44cm x 24cm x 14cm, soling stone & masonry stone, solid blocks of size 30x20x15cm, twisted steel/deformed bars, steel, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), adjustable span eso+si (2.35-3.40), wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), second class kail wood in planks, second class kail wood in scantling, safeda ballies 125 mm diameter, timber, solid blocks of size 40x20x20cm, solid blocks of size 40x20x10cm, fine sand (zone iv), fine sand (1 part badarpur sand 2 parts jamuna sand, precast chequered cement tiles 22 mm thick dark shade using ordinary, cement, black colour dark shade pigment, deharadun white lime, water proofing cement paint, vitrified floor tile 60x60 cm, high polymer modified quickset tile adhesive, ceramic glazed tiles ist quality 300 x 300 mm in all shades designs, except white, ivory, fume red brown etc., ceramic glazed tiles ist quality minimum thickness 5 mm in all colours, shades and designs except burgundy, bottle green black, rolling shutter made of 80x1.25 mm machine rolled laths, top cover for rolling shutters 1.25 mm thick, 27.5 cm long wire spring grade no 2 for rolling shutters, g.i. pipes 40 mm dia, g.i. pipes below 100 mm dia, welding by electric plant, anjili wood scantls, 35 mm thick factory made solid panel pvc door shutter of single piece, extruded profile non decorative finished (matt finished), powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, pincoda wood scantls, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, pincoda wood planks, float glass sheet of nominal thickness 4 mm (weight not less than 10, kg/sqm), mild steel round bar above 12 mm dia, flats up to 10 mm in thickness, rawl plug 50 mm (designation 10 nos), black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type wate closet, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe), polyethylene water storage tank with cover and suitable locking, arrangemnet, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, stainless steel kitchen sink - without drain board 470x420 mm bowl, depth 178 mm, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with, length not less than 700 mm i/c pvc waste fittings, pvc pipe 110 mm outer dia 6kgf/cm2, hollow bloks oof size 40x20x10cm,
|